Low-Rise Curtain Walls
Curtain walls have certain advantages. The main one is appearance, followed closely by maximized glass for daylighting. Another advantage is that erection can be done as fast as any other system.
Low-rise curtain wall is different from high-rise curtain wall. The sophistication of the water shedding and pressure equalization are the differences. These details show a low-rise solution.
Some of the key factors to consider about curtain walls are:
Structure - the curtain wall carries the wind load into the structural frame. The individual curtain wall framing members need to be strong enough to do that with minimal bending.
Material and Finish - For most low-rise curtain walls the material will be aluminum. Unless you use clear anodized aluminum, the choice of color is limitless using high performance coatings.
Glazing - The choice of glass affects not only appearance but also the comfort of those inside. Most buildings that use curtain wall are larger than the magic 10,000 SF limit at which the internal use of the building overshadows the building envelope in energy consumption. The choices are enormous. Remember that glass thickness is a function of the glass size.
Sight Lines - Not all curtain wall is created equal when it comes to the width of the mullions. The visible width of the mullions has a major impact on how delicate or muscular the building appears.
Sealants - The curtain wall manufacturer will offer glazing sealant options, but consider the perimeter of the curtain wall where it meets other materials. These may be hard to reach for replacement due to a premature failure.
Sound Separation - Sound separation, both vertically and horizontally, is an important consideration during design. It can be difficult to stop sound at the perimeter of floors and partitions where they meet the curtain wall if it hasn't been designed into the construction.
Details
Low-Rise Curtain Walls consist of a metal framing system with glass (or similar) glazed into it. The curtain wall system prevents water penetration by sealing out water and draining any water that penetrates out thru channels in the framing members.
The key features of the details are the:
structural bracing for wind loads
sill flashing to direct any moisture to the exterior
sound separation at the floor slab
identifying other components of the wall
(see the key notes for materials used in this case)
COMMENTS:
This detail is needed to specify the configuration, construction and materials required for the curtain wall.
This detail requires further details and specifications covering these conditions.
Building Codes have an impact on aspects of the work shown here.
You may want a specification covering the quality and installation aspects of these materials. The notes have specification reference numbers included to help make that connection.
These details should be placed on the Wall Sections sheet, the A-300 series of sheets per the National CAD Standards, contrary to the designation shown here.
Download zip file of details.
See the Terms of Use for disclaimer.